Underglow kit builder

Build your underglow kit

RGB+W LED strip on a RhinoLink: each side of the vehicle gets its own channel. Pick your lengths and see exactly how it hooks up.

Top view of a vehicle with LED strips around the body, wired to a controller at the front FRONT REAR RHINOLINK 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 6 FT 32″ 32″ 60″ 60″ 16″ 16″ CH 1 DRIVER SIDE front → side → rear CH 2 PASSENGER SIDE front → side → rear
  • CH 1Driver sidefront → side → rear
  • CH 2Passenger sidefront → side → rear
Controller
Your vehicle

Overall length and width, in inches. With these we check that every extension reaches. No tape handy? Search your year, make and model with the word dimensions.

Strip type

RGB+W adds a white LED to the red, green and blue. The whole kit is one kind or the other: the two cannot share a data line.

Front

Built as 2 × 32″ strips, one each side of the centerline.

No front strips. Their extensions come out of the kit too.

Sides

One strip down each side of the vehicle.

No sides strips. Their extensions come out of the kit too.

Rear

Built as 2 × 16″ strips, one each side of the centerline.

No rear strips. Their extensions come out of the kit too.

Extension reach check

Add your vehicle's length and width and we check that every extension reaches.

  • RhinoLink → front strip Mount the RhinoLink where a 6 ft extension reaches the middle of the front.
  • Front strip → side strip Not checked yet. Add your vehicle's length and width.
  • Side strip → rear strip Not checked yet. Add your vehicle's length and width.

How we check: the distance across the body from the end of the front or rear strip to the side, plus the distance along it to the side strip, plus 15% for routing around the wheel wells. The 4 in connector lead on each strip end counts toward the reach. It is an estimate from two numbers, so if a run looks close, measure it.

Spare extensions

Want more slack on a run, or a spare in the box? Add extra extensions here. They are the same ones the kit uses.

Extra 6 ft$11.00 each
Extra 12 ft$15.00 each

In the kit

  • 1×RhinoLink Bluetooth Controller$750.00
  • 216″RGB+W LED strip, built as 6 strips$378.00
  • 6×6 ft extensions$66.00

Uses 2 of RhinoLink's 5 channels. The other 3 are free for more lights later.

Strip lengths

  • Front64″ across = 2 × 32″
  • Sides2 × 60″
  • Rear32″ across = 2 × 16″

Front and rear are measured across the vehicle and split down the middle, one half per side.

Kit total$1,194.00

Not sure what lengths fit? Call 704-270-2695 and we will size it with you.

Kit total$1,194.00

How it hooks up

Both sides are wired the same way, each on its own RhinoLink channel: driver side on one, passenger side on another. There is no splitter. Every strip has one extension feeding it. Extensions are 6 ft, or 12 ft where the reach check calls for it.

  1. RhinoLink Bluetooth Controller
  2. 6 ft extension
  3. front strip
  4. 6 ft extension
  5. side strip
  6. 6 ft extension
  7. rear strip
  • Clean firstWipe the surface with a degreaser or alcohol before you stick the strips down, or the tape will not hold.
  • Set the channelsIn the RhinoLED app, set each channel to the kind of strip on it.
  • Strip warrantyOur warranty for LED strips does not cover misuse, damage or incorrect installation.